ase test questions and answers  
 




Free ASE practice test question 10.

Answer: D is correct. The cylinder bore is worn where the rings contact. Above the contact area, there is no wear. This creates a ridge which must be removed before installing the pistons.

 

 

 

 


 

ase study guide

ASE Test Prep and Study Guide

free ase practice test ase test questions ase test answers ase study tips free ase practice test contact 

ase test questions and answers

ase study guides

ase a1 automotive engine repair


10. A ridge reamer is used for what purpose during an engine overhaul?

a. Remove the ridge from the edges of the valves
b. Remove the ridge from the edges of the cam lobes
c. Remove the ridge from the tops of the pistons
d. Remove the ridge from the tops of the cylinder bores


a. Incorrect, valves should be ground to restore the valve faces
b. Incorrect, if there were ridges on the cam lobes, the camshaft should be replaced
c. Incorrect, ridges due not develop on pistons
d. Correct, the cylinder bore is worn where the rings contact. Above the contact area, there is no wear. This creates a ridge which must be removed before installing the pistons

 

back to practice test

 

 

 

ase free practice test

ase test preparation

 

 

ase test preparation
 



 

free ase practice test     |     ase practice test     |     ase test questions and answers     |     ase study tips     |     contact

The National Institute for Automotive Excellence has laid out very structured guidelines to help with the entire test taking
process.  They are a completely independent and non-profit organization whose sole purpose is to make the automobile
repair industry better and more reputable.

The study material shown are some of the top selected material available online. Commissions may be collected from the
merchants seen through this website.  This helps support costs that may be incurred for the operation and progression of
this website.

© 2015 Free ASE Practice Test .com sitemap xml
All Rights Reserved.